Maintenance and controller adjustment of quicksand

1. After receiving the product, there is no need to adjust it, just flip it back and forth a few times.

2. Due to changes in temperature and pressure, it is sometimes necessary for you to adjust the air and water in the quicksand painting. The packaging of the quicksand painting is equipped with an air conditioner (syringe)

3. Specific operation: The art of quicksand is the natural balance of water, sand, and air. The height of the air layer varies depending on the size of the product, with a height of approximately 0.5CM to 2CM. Sand will have a good flow velocity.

Drifting sand falls too slowly: just draw out some air

1. Each quicksand painting can be adjusted with an air conditioner (syringe) to adjust the air and water inside the quicksand painting

2. An air conditioner (syringe) can be inserted around the square quicksand painting, and a circular quicksand painting will have a hole for adjustment.

3. Specific operation: Concentrate the bubbles together (for circular quicksand paintings, the bubbles need to be concentrated at the hole) (to ensure that the sand moves away), and then insert an air conditioner (syringe) into the air hole to extract air.

Quicksand falling too fast: just add some air

1. As with the above method, gather the bubbles together (for a circular quicksand painting, the bubbles need to be concentrated at the hole) (to ensure that the sand moves), and then insert an air conditioner (syringe) into the air hole to inject air. If many small bubbles in the quicksand painting become a particularly large bubble, there are two solutions: 1. Shake the quicksand painting to make the large bubbles disperse and become small bubbles.

2. You can add some water in moderation to replenish the evaporation of water.

NOTES:

1. When injecting water into quicksand paintings, it is necessary to use pure water or boiled water for cooling

2. As with the above method, extract some air and empty the air conditioner tube (syringe tube)

3. Use an air conditioner (syringe) to pump in and fill in an appropriate amount of water to prevent excessive pressure and glass breakage (excessive air can cause excessive pressure inside the quicksand painting, which can cause glass breakage, remember!)

3D mobile sand painting

360 ° rotatable sand painting

Air pumping and water injection hole

Easy to operate

Free adjustment of air volume and quicksand velocity